Plunder from the Plastic Warrior Show 2026

 I usually take a lot of photos at the Plastic Warrior show, particularly the more unusual items that turn up, partly to share information and images for those collectors who can't attend but primarily for use in promoting the show the following year.  This year I took my camera along but spent so much time running around I completely forgot to take any photos, so apologies for that and here are some of the bits I managed to pick up.

First up an early Monarch brand Conquistador in red/brown plastic which carries the lozenge shaped indent marked "England" under it's base which was used by Hilco (John Hill & Co), seen here previously: Collecting Toy Soldiers: Converting Monarch Conquistadors   I have lots of these and don't really go in for collecting all the different plastic colour variations but this chap was in a 50p junk box so he deserved rescuing.

My prize find of the day was the figure of Queen Elizabeth I from the Sir Francis Drake set made by Charbens, I am now just missing the figure of Sir Walter Raleigh to complete the set.  Everything turns up eventually and it's that quest which keeps us collecting.

The 75mm Warsaw Pact Sailor in blue is made from some sort of PVC plastic, he was made in the former East Germany by PGH Effelder, and is marked as such under the base.

The Standard Beaverette Light Reconnaissance Car (produced by the Standard Motor Co and named after Lord Beaverbrook) is an unusual item, it was an improvised armoured car with armour plate being riveted onto a commercial car chassis.  Considered unsatisfactory for overseas service it was issued to the Home Guard and RAF Regiment for home defence so I'm not sure what I'll do with it but I like the concept.  This is a 3D print and is very robust, I bought it from John McRae who has started a new venture making 3D printed figures but I think he said this was made by someone else.  I've noted with such 3D printed vehicles that they often seem to have this pronounced riveting, which is not particularly accurate but gives the model a bit of character, and I rather like it.

The Infantryman standing to attention is an early Zang for Timpo, there are several versions of these figures but this is the first I've seen in a beret, a forerunner of the figures Roy Selwyn-Smith would later design in plastic for Zang/Herald.

A copy of the Britains Armoured Car (based on the Crossley) which was issued from 1934 until 1941, the body and wheels are a one part white metal casting with separate revolving turret so it's quite a weighty piece.  I missed one of these at last year's show so was delighted that the same seller brought  along another one this year, it will see service in any number of 1930's scenarios.

An assortment of composition French infantry, the first made in Germany by Manzsoldaten dates from about 1910 he's not fully round and is what the some collectors describe as "Demi Ronde".  

In the centre a 60mm Poilu made in France by INCA (no relationship to the Belgian firm Incamin), according to the French "soldatplastique 1/32 forum" trade catalogues show the firm was based in Paris and made toys between 1957 and 1965.  They produced a small range of WW1 French and Colonial troops, including mounted, and are sometimes marked INCA FRANCE along the front edge of the base (none of mine are marked). 

The 80mm Standard Bearer was made in France by Cellose, the flag staff is complete, but out of picture, and is missing the cloth flag, fortunately I have one somewhere to make him complete.

Now this one is a mystery which I'm hoping some of the French collectors on the soldatplastique 1/32 forum or one of the facebook groups will  be able to identify.  Made in a composition material he stands 100mm tall, has no base and no markings, my first  thought was it's made by the French firm J.R.D. who's figures were on the large size and sculpted in a cubist art deco style

Rear view of the 100mm Foreign Legion figure above.

John Clarke very kindly cast eight of these smaller explosions for me in white metal, along with the recast of a Taylor  Barrett deep sea diver, and passed on four of the larger resin example, which were made by Paul Watson.  The explosions are copies of originals from the 1930's made in Germany by Lineol, can't wait to get these painted up and see them on the table.  

The three English Civil War conversions were made by Eric Kemp and kindly gifted to me by Graham Apperley, who knows that I'm a big fan of Eric's work, from the ECW collection he acquired last year (see link to Graham's blog "Tales from the Toy Room" in the list on the right) 

Last but not least Andreas Dittmann gave me this mix, a post WW2 composition infantryman made byy Solido Belge, a 1980's resin copy of an Elastolin WW2 marching drum major and three plastic horses made in Germany but I can't remember who Andreas said they were made by. 

An eclectic haul, as always at the Plastic Warrior show, because anything can turn up, and many thanks to John, Graham and Andreas for thinking of me and passing on these goodies.

Another display case filled.

 Finally got around to rehoming the collectable English plastic figures in a display case where they will be relatively safe from damage.  There is no real order to this, more a case of getting stuff out of the boxes they've been shunted around in for the last several years and standing them up so I can see what I've got, it's part of the separation between collectables for research and wargame armies for play.  There will be changes, some added to the shelves and others relegated back to the boxes but for now it's a step in the right direction.

The cabinet was one of those rather naff 1920's deco display units that my aunts used to keep their best china in, the stuff that was for show and never got used from one end of the year to the next, I think every house had one in the 1950's and I never liked them.  But this one was abandoned in the back of a junk shop in need of a complete overhaul and cost me nothing (someone said they'd pay me to take it away).  After stripping the crazed varnish, re-glazing the doors, fixing mirror tiles to the back and adding all new glass shelves (so not such a bargain after all!) it now occupies a suitable niche in the Toy Soldierarium (my wife's term not mine). 

I will get around to putting up clearer pics of individual figures at some pint but in the meantime here are a few random closeups:

 

Seen at the Plastic Warrior Show - May 2012

Now that I feel suitably recovered from the exertions of the day here are a few of the photos I took at the Plastic Warrior Show last weekend:

This rather fine mounted Saracen made in France by JIM was on the stall of Belgian collector Daniel Lepers, shame about the horse's tail though.

The joy of attending a show is the plethora of boxes to rummage through.

Even bigger boxes, plenty of raw materiel for collectors building armies or making conversions.

And then some good stuff

At the start of the show these shelves were full, you can see from the gaps that by the time I got my camera out nearly half had been sold by collector Joe Bellis.  Click on the picture to enlarge then click again and you will see:

Top row - bartender and gambler with derringer pistol from the Cherilea Western Bar Brawl set.

Second row - Large scale (65/70mm) Lone Star Indians, these have swoppet heads, looks like the whole set here.

Third row - The Cherilea Great Helm Knight, originally made in hollow cast lead as part of the Baronial Series, the mould for the horse was modified for the plastic version to make it a rearing rather than charging pose, also I have never seen the plastic version with the knights helm so I suspect they dispensed with it.

Fourth row - Four Monarch Highlanders (two each with double handed sword and claymore and buckler shield) which I mentioned recently in the post about Monarch Conquistadors, a Speedwell FFL, a Trojan WW2 Australian and at the end a Britains ECW roundhead.

Fifth row - A couple of the rare Crescent 65mm Mohicans, a Cherilea Davy Crockett, seven Timpo Cossacks - very hard to find these undamaged, Charbens FFL officer and another of the Trojan Australians.

Bottom row - Crescent mounted Arabs, FFL and First World War British Cavalry, the foot figures are two Cherilea Nubians, a prone Japanese machine gunner from Trojan (hard to see), a very rare Cherilea Indian firing a bow - previously made in hollow cast lead and finally a Cherilea Davy Crockett.

Converting Monarch Conquistadors

Back around about 1960 toy manufacturer Cherilea acquired parts of it's competitor Hilco (Johillco) which was more or less imploding.  Among these assets were a small range of toy soldiers being marketed under the brand name Monarch, there were some modern marching Highland bandsmen, a set of three "Rob Roy" type Highland clansmen and this set of six Conquistadors which were designed by sculptor George Erik, a prolific talent probably best known for his work at the Spanish firm of REAMSA (Resinas Artificiales Moldeadas S.A. )

The pikeman (back left) in cream plastic is an earlier figure which carries the distinctive Hilco lozenge shaped indentation under the base, in this case it simply says ENGLAND, probably because it was made after the moulds were acquired by Cherilea.  I don't know if Hilco ever produced these figures and I don't think I have ever seen one actually marked Hilco.  The remaining five in black plastic are the more common Cherilea products sold in vast quantities through Woolworth's stores, they all have the simple blank circular indentation under the base common to Cherilea figures.

Above: the distinctive Hilco style indentation under the base.

In the summer of 1990 the brass moulds for all the Cherilea figures were owned by Triang and were due to be sold for scrap.  Giles Brown of Dorset Toy Soldiers got wind of this and in company with toy soldier enthusiast and author Andrew Rose set off with a truck for the Triang factory at Droylsden near Manchester to rescue as many as possible.  They loaded up as many bolsters as the truck's suspension could take, including the one for these Conquistadors and took them safely back to Dorset (a bolster is the steel plate that the individual brass moulds are mounted on for fitting to a plastic injection moulding machine, each bolster would typically hold six individual moulds and weigh as much as a large truck battery).  Giles phoned me to say he'd had to leave a lot of the moulds behind if I wanted to try and save them from the scrap merchants, I had just been made redundant so with time on my hands and money in my pocket I set off for the North, but that's another story for another day.

The three poses above were all made from the same standing swordsman with just a change of head or arms.

Back in Dorset Giles discovered that the bolsters would need a lot of work and investment before they could be brought back into production, fortunately he found a "white knight" in the form of Jamie Delson of The Toy Soldier Company who ordered sufficient of each range to justify the cost of the renovation work.  So that is how these fine toy soldiers came to be available to us once more as remoulds, and the great thing about remoulds is that you can convert them to your hearts content without feeling any guilt that you are destroying something old and original. 

More simple conversions, the bases have been extended with Miliput to make them more stable, a laborious process which is not recommended. 

Which brings me to the point of this post, I collect toy soldiers to play wargames with and for this purpose it's fine to have lots all in the same position but sometimes you want a little bit of variety and that's where converting comes in.  The examples in the two pics above are my own humble efforts and in each case are little more than an adjustment of head and arms.  The two pics below show the work of others more skillful than myself, some were made by the late George Weygand (who founded Maros Models) and others by Mike Ellis (who produced a range of figures under the Marksman Models name).

Sadly I can no longer remember who made what but I picked these up many years ago at a Plastic Warrior show and they have been languishing in a drawer until now awaiting completion.  You can never have too many pikemen for this period and it's amazing how much variety you can create when you start cutting figures at the waist and swapping the bits about as has happened here, note the use of a sash to hide the joins.  When it comes to conversions I have never had any qualms about copying other peoples ideas and am always flattered when others improve on my own.

My only contribution to the process has been to mount them on Tu'penny bits for stability, the original slim bases being annoyingly unfit for purpose.  Now gentle reader before you reach for the comment button to tell me that defacing the coin of the realm is a criminal offence let me assure that it is not, or at least not any more.  Some years ago I wrote to H.M. Treasury seeking clarification of this very point but in the time honoured practise of the Civil Service and perhaps a spirit of Non Culpa they chose to simply ignore me.  Undaunted I researched further (you can see this matter was causing me some vexation) and discovered that new legislation was passed in 1982 overturning the old rules and I am much relieved to know that I am not committing a felony.